FFP2 Save Mask With CE Certificate , FFP2 Dust Mask , Particulate Respirator Face Mask
1 . Descriptions
MX-2005 FFP2V Cup Mask use adjustable aluminum nose clip so it makes wearing more sealless leakage ,use latex-free elastic strap , soft nose liner so it make softer and fit the face .And use easy-breathing valve then it makes breathing more smooth .
2 . Material of each layer
Outer layer : Protective needle punched cotton
Middle layde : FFP2 melt blown filter(have filter efficiency level of 94%)
Inner layer : Shaped needle punched cotton
3 . Packing
Normal Packing 12pcs/box, 240pcs/ ctn .
To meet different requirements of different customers,mask can be under blister pack.
4 . Certification
This product has been tested according to the following European Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.
5 . Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its required for use.
- Use the respirator in accordance with applicable health and safety regulations.
- Fit the respirator and check leak-tightness before entering the contaminated area.
- Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.
6 . Expiry date
If maintained as per storage instructions , products can be used up to 5 years from date of manufacture.
7 . Advantages
- Polypropylene (P.P.) outer layer provides smooth lining and avoids loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges. Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking. Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the reliability / regularity of the production and the control of the environmental impact.
8 . More pictures
